Acurite Device Id, If you purchase a new Connection Device

Acurite Device Id, If you purchase a new Connection Device to replace your existing Connection Device but wish to monitor the same sensor (s), use the replace option. I have an acurite 5-n-1 weather sensor, p/n VN1TX it has wind direction, wind speed, temp, humidity, and rainfall. Connecting to MyAcurite Greetings, I have an Acurite #01516 with a 5 in 1 sensor. Type "192. No outdoor sensor reception. If none of these steps work, please contact AcuRite support for further troubleshooting. Address - the address installation location of the AcuRite Connection Device (AcuRite Access, smartHUB, PC Connect). Also for: 06059. 4. 5-in-1 Sensor Setup. It's connected to my home network, receives data from the 5 in 1 sensor, and is connected to Weather Underground. Provide the address details to receive more accurate current weather conditions and forecast information. com to create an account) or if you already have a My AcuRite account, add the Device ID of the Indoor Display to your account. View and Download ACU-RITE 06086 instruction manual online. I'm using the correct device ID, but none of these apps will detect the How to follow a My AcuRite account Before you begin, make sure you have the 12-character Device ID of the AcuRite Connection Device (AcuRite Access, smartHUB, PC Connect) you want to follow. 2032 Weather Station manuals and instructions online. An AcuRite device with a 12-character Device ID or MAC Address can connect online to stream sensor data for remote monitoring. com FREE DELIVERY possible on eligible purchases The Device ID is located on a white sticker on the back of the display. Download ACU-RITE 2032 PDF manual. ten minutes for the smartHUB device ID to be Device ID located on the bottom side of the smartHUB and Verify the smartHUB has a network (Internet) connection. 1 into your browser to bring up the setup page. Type 192. If the AcuRite Access® was just powered up, allow up to ten (10) minutes for the device to connect and register with My AcuRite®. When you replace an AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display (Connection Device) its linked sensors are transferred to the new device. Shipping Information Warranty and Return Policy Product Registration Donation Request Missing Parts Where to Enter Discount Code Why Won't my Order Go Through? Where Can I Find My Model Number? Where Can I Find My Device ID? Where can I find a user manual? What are the Accuracy Standards? What Batteries are Recommended for use in AcuRite Products? The information displayed on your Dashboard includes the current readings of your AcuRite sensors, the current weather conditions, and the forecast for the location of your Connection Device. The sensor model number will Once on the product page, click on the “Manuals” dropdown. If the Network Status Light flashes rapidly in 30 second intervals, this indicates there is no Internet connection. Atlas weather station pdf manual download. e. PAGE 2 ® TROUBLESHOOTING Access is not recognized when adding to My AcuRite account Possible Solutions: • Allow up to ten minutes for the Access Device ID to be activated with myacurite. ACU-RITE 2032 User Manual View and Read online. It may also be labeled the MAC Address and can also be located in the battery compartment. You can not tell which sensor is which and when you have 10 “available sensors” you have no way of knowing what device you are adding. Using rtl_433 in analyze mode, I've been able to (mostly) reverse engineer the pac View and Download ACU-RITE 01536 instruction manual online. App requirements: iPhone or iPad app: iOS Device ID - an AcuRite Connection Device is associated to your My AcuRite account by its unique 12-character Device ID. Outdoor sensor readings can also be shared with Weather Underground - when shared, the readings are sent directly from the Connection Device to Once set up, create a My AcuRite account (go to www. Page 1: Package Contents After starting the Access, the Create your account and register your Access at www. To share with Weather Underground, you must have a My AcuRite account and enable sharing to My AcuRite in PC Connect. The AcuRite Access® is associated with your My AcuRite® account by its unique 12-character Device ID. Where Can I Find My Device ID? Address - the address of the installation location of the AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display. Each Connection Device you share with WU is required to have its own Weather Underground Station ID and Station Key. The My AcuRite mobile app and desktop website give you everything you need to know about your outdoor environment. Is this weather station Wi-Fi-enabled? Yes, this weather station connects directly to Weather Underground for remote monitoring. Shop weather sensors and parts such as temperature probes, weather station displays and weather sensors from AcuRite's weather device selection. If you are using a Wi-Fi LCD display, the Device ID is located on a white sticker within the battery compartment of the display unit. "Device must be connected and reporting data to claim it" Error No Network Connection (Red Flashing Light) Sensor (s) Offline on My AcuRite® Dashboard Offline on Weather Underground Only What does the Front Light on the AcuRite Access® Mean? Having two Access hubs makes it even harder. Your Dashboard displays the last received readings uploaded by a Connection Device to My AcuRite and the readings are also displayed in Charts & Details. These weather stations are designed to provide accurate and reliable weather information to help users make informed decisions about their outdoor activities, gardening, and home safety. Measure temperature, humidity and other weather conditions, and view the data easily on a color display. 01536 weather station pdf manual download. com or download the My AcuRite® app from the App Store or Google Play to create a My AcuRite® account. It's a bummer because my display is in a room that doesn't otherwise have a temperature sensor that reports to the app, so I'm losing out on getting that recorded. To register your product, please click here. Following allows you to view your family and friends' My AcuRite® sensor readings from your own My AcuRite® account. Page 2: Troubleshooting HAVING PROBLEMS? The AcuRite Access® is associated with your My AcuRite® account by its unique 12-character Device ID (MAC Address) located on the bottom of the AcuRite Access®. When prompted for a password, enter the device ID, located on the back of the Device ID - an AcuRite Connection Device is associated to your My AcuRite account by its unique 12-character Device ID. If you no longer use an AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display (Connection Device) we recommend removing it from your account. Open your web browser on the device that is connected to the AcuRite display. acurite. Close the app on your phone and re-open the app. A PC Connect Device Connection is is associated to your My AcuRite account by the unique 12-character Device ID of the 5-in-1 Indoor Display. The Connection Device then sends its received readings to your My AcuRite account. When you add a device to your account, you must provide its Device ID. If you continue to have problems, try rebooting your phone. Often times your device will automatically reconnect to your home Wi-Fi after completing the setup. Device ID - an AcuRite Connection Device is associated to your My AcuRite account by its unique 12-character Device ID. This is because knowing and acting upon key conditions like humidity and temperature can empower you to make a positive difference in your home’s comfort and overall healthfulness. If you see any "unsecure network" warnings, know that it's safe to continue. View details about our 1-Year Warranty. View and Download ACU-RITE 06058 instruction manual online. Est. High Resolution Weather Station Display. Acurite to MQTT for Home Assistant with Device Discovery and sensors nested under main gateway - rob7419/acurite2mqtt-test About Your Connection Device View the Profile of a Connection Device Add a Connection Device to My AcuRite® Replace a Connection Device Remove a Connection Device From My AcuRite® Manage Time Zone of Readings, Charts, and Alert Notifications Manage How Reading Units are Displayed Manage Your Forecast Location Device ID - an AcuRite Connection Device is associated to your My AcuRite account by its unique 12-character Device ID. Download AcuRite 01512 PDF manual. Once linked, its readings are sent to your My AcuRite® Dashboard. com, go to the AcuRite Support website (support. Log out and log back in. Access is not recognized when adding to My AcuRite account Possible Solutions: • Make sure the Ethernet cable is firmly connected. Verify the device has an internet connection. Possible Solutions Verify that My AcuRite® has been receiving readings for at least 1 hour - your sensor readings are displayed on the Dashboard. myacurite. User manuals, AcuRite Weather Station Operating guides and Service manuals. Please visit our help pages for answers to some of the most commonly asked questions. com or download the My AcuRite® app from the App Store or Google Play. Make sure your computer meets the minimum AcuRite 01512 User Manual View and Read online. Click on the ‘Add Device’ button and enter the name for the device (i. com or download the AcuRite app from the App Store or Google Play. Unplug the smartHUB power adapter, wait ten seconds, then plug back in. smartHUB Connection Device - verify the device has a network (internet) connection. device will connect to My AcuRite NOTE: It may take up to 10 minutes for the Access to communicate with and download available firmware the My AcuRite service. See screenshots, ratings and reviews, user tips, and more games like AcuRite NOW. Download AcuRite NOW by Chaney Instruments on the App Store. com © Copyright 2026 Chaney Instrument Co. * Press "Save If you are using the My AcuRite® app on your iPhone/iPad or Android mobile/tablet device, learn how to get around and quickly access what you need. Location Details - automatically generated based on the address settings. Granted it does differentiate between a 5-in-1 vs Atlas vs Temp sensor but it needs to differentiate between individual devices in those categories. • Make sure you entered the Device ID correctly. 06058 weather station pdf manual download. The Device ID will always begin as 24:C8:6E and have 6 following characters. This section is for general troubleshooting that applies to many devices A Connection Device uploads the readings received from the Outdoor Device to My AcuRite and also to Weather Underground (requires additional setup). To ensure you receive full warranty benefits: Register your product Retain your original proof of purchase. AcuRite Access ® An AcuRite Access® is a stand-alone device that sends readings from AcuRite sensors to My AcuRite® over your network (Internet) connection. The following reset steps can be performed to correct issues of the sensor not connecting to the display. Select Add. Verify the 12-digit Device ID located on the bottom side of the Access and re-enter on My AcuRite. AcuRite Iris (5-in-1) Home Weather Station with Wi-Fi Connection to Weather Underground with Temperature, Humidity, Wind Speed/Direction, and Rainfall (01540M) , Black A Connection Device uploads the readings received from the Outdoor Device to My AcuRite and also to Weather Underground (requires additional setup). My AcuRite Monthly Weather Reports Explained My AcuRite® is Displaying Wildly Inaccurate Sensor Readings (data) No Sensors Listed in Available Sensors Sensor Stays Offline After Replacing Batteries Why are the Pressure Measurements Different in My AcuRite® Compared to my Indoor Display? Buy AcuRite Iris (5-in-1) Indoor/Outdoor Wireless Weather Station for Indoor and Outdoor Temperature and Humidity, Wind Speed and Direction, and Rainfall with Digital Display (01512M): Weather Stations - Amazon. Possible solutions Download available updates. com to complete the setup. com or from the AcuRite app, you must set up Weather Sharing in PC Connect. The following link will walk you through adding the Device ID to your My AcuRite® account: Add a Connection Device to My AcuRite® To view your readings online on at myacurite. Enter or select your wireless network name, network password, and the WU Station ID and Station Key/Password (created in step 1). AcuRite’s weather tools include weather stations with touchscreen display and Alexa integration, thermometers, rain gauges, gardening gadgets and more. 5. However, I cannot seem to get it to connect to the MyAcurite mobile app or either the PC Connect app or the My Acurite website. You may have one or multiple You must link a sensor to an AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display (Connection Device) in order to monitor and view its sensor readings from your My AcuRite® account. Setup. NOTE: For PC Connect users only, Weather Sharing is configured within the PC Connect software installed on your computer. Professional Weather Display and 5-in-1 PRO+ Weather Sensor. 01512 Weather Station manuals and instructions online. My AcuRite for Laptop, Desktop, and Tablets With My AcuRite smart home systems for environmental monitoring, you can stay connected to your surrounding environment, and keep tabs on all the places that matter, in and around your home. About sharing more than one AcuRite Connection Device Each My AcuRite Weather Underground (WU) Sharing Profile has one unique Connection Device and one sensor. Connect your display to your Wi-Fi by opening the network tab and clicking on the AcuRite Wi-Fi Display Model Number. 1" in the address bar and hit enter to access the AcuRite WiFi display settings website. Home) and Device ID. AcuRite sensors take readings at their installation location and the readings are wirelessly sent to an AcuRite Connection Device (AcuRite Access, smartHUB, PC Connect). A Direct to Wi-Fi Display Connection Device is associated with your My AcuRite® account by its unique 12-character Device ID (MAC Address) located on the back of the display unit, possibly in the battery compartment. Verify the smartHUB has a network (internet) connection. Verify the AcuRite Access® device has a network (Internet) connection. Click to register your AcuRite product. 168. Also for: 06014. Professional Weather Center. When you follow a My AcuRite® account, the AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display (Connection Device) you are following and its linked sensor readings appear as a tab on your Dashboard. Then download the My AcuRite® mobile app or visit www. Once you add the Connection Device to your account, you then link your AcuRite® sensors to the Connection Device in your My AcuRite® account. Managing your devices include adding your Connection Devices to your account and adding sensors to each Connection Device, managing device settings, setting how reading units are displayed in your account, and managing your AcuRite The 5 digit model number of the indoor display will allow you to find a product page on AcuRite. When you create your account, you are guided through a few simple account setup steps - including adding the 12-character Device ID of your AcuRite Connection Device. Verify the 12-digit Device ID located on the bottom side of the smartHUB and re-enter on My AcuRite. Once set up, create a My AcuRite account (go to www. Go to myacurite. The following link will walk you through adding the Device ID to your My AcuRite® account: Add a Connection Device to My AcuRite® Connect your display to your Wi-Fi by opening the network tab and clicking on the AcuRite Wi-Fi Display Model Number. If the Network Status Light flashes rapidly in 30 second intervals, this indicates there is no internet connection. My AcuRite’s environmental monitoring platform is an integral part of any smart home AcuRite is a well-known brand that specializes in manufacturing weather stations. When you create your account, you are guided through a few simple steps to set it up, including adding the 12-character Device ID of your AcuRite Access® or Display and linking your AcuRite® sensors. Connect to the Wi-Fi signal (named AcuRite 01538) of the AcuRite display from your computer or mobile device. Each AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display (Connection Device) is displayed as a tab on your Dashboard. Symptoms of the sensor not connecting to the display could include: No outdoor temperature Shop weather stations and weather technology for outdoor and indoor home monitoring systems. I'm using the correct device ID, but none of these apps will detect the A PC Connect Display Connection Device is associated with your My AcuRite® account by its unique 12-character Device ID (MAC Address) located on the back of the display unit, possibly in the battery compartment. You may have one or multiple AcuRite IrisTM (5-in-1) High-Definition Display with Detection Option model 06058 This product requires an AcuRite Iris Weather Sensor (sold separately) to be operational. 06086 weather station pdf manual download. com) and enter your model number in the search bar on the support site to locate the manual in our Discontinued Products/Manuals section. com, the manual, or help an AcuRite agent assist with a support ticket. Once you add the PC Connect Connection Device to your account, you then add your 5-in-1 sensor to the PC Connect Connection Device. Our newest Wi-Fi displays offer direct-to-My AcuRite for those who want to monitor their weather data from anywhere. Once the Access has received a signal from a compatible device, it may take up to 10 minutes to communicate with the My AcuRite service and allow you to add your Device ID to your account. • Verify the Access has a network (internet) connection. If your model is discontinued and/or no longer available on www. Make sure you entered the Device ID correctly. Once added, you can manage its settings, including adding sensors. Download 145 AcuRite Weather Station PDF manuals. Outdoor Device. To monitor and view your AcuRite sensor readings from My AcuRite, your AcuRite Connection Device must be added to your account. Can I power the AcuRite Iris sensor without batteries? Yes, all AcuRite Iris weather stations are compatible with the Solar Power Pack for AcuRite Weather Sensors (item #06051M, sold separately). An AcuRite Connection Device (AcuRite Access, smartHUB, PC Connect) sends sensor readings to My AcuRite and Weather Underground over its network (internet) connection. I’ve had an Acurite Access and some sensors for a couple years, but it bugged me that I couldn’t get this data into Home Assistant, so I finally did something about that. Downloading and installing the PC Connect software is simple and once installed, you can set up Weather Sharing, Data Transfer, and other preferences. Open the Wi-Fi settings of your Wi-Fi-compatible device and select and connect to the Wi-Fi network with "AcuRite" in its name. From the top menu, select Settings > Share Weather > Accounts I Follow. · Built on Mon, 21 Nov 2022 23:20:46 GMT Select Share Now. If you have further questions, please reach out to our support team via live chat or email request on the AcuRite Support website. View and Download AcuRite Atlas instruction manual online. Once the device is added to your account, you then add your AcuRite sensors to the Connection My AcuRite · www. Step 2: Create a My AcuRite® account. Display Unit Setup. AcuRite Connection Devices (AcuRite Access, smartHUB, PC Connect) and the AcuRite outdoor and indoor monitoring sensors are the heart of the My AcuRite solution. Verify your Weather Underground Sharing Profile in My AcuRite® has the correct Weather Station ID and Station Key (Password) and the correct sensor is selected. Device ID - an AcuRite Access®, PC Connect Display, or Direct to Wi-Fi Display is associated with your My AcuRite® account by its unique 12-character Device ID. The Device ID is located on a white sticker on the back of the display. If you have an account, add the PC Connect Display to your account. Device Name - the name of the AcuRite Connection Device (AcuRite Access, smartHUB, PC Connect) - the name appears as a tab on your Dashboard. com. 4. Edit 2021-06-24: Modified to have rtl_433 publish to individual topics and removed demux step This is a complete end-to-end guide of setting up rtl_433 on a Raspberry Pi to read data into MQTT and then into Home Assistant AcuRite IrisTM (5-in-1) Weather Station with Weather Ticker Display and Lightning Detection models 01022, 02080, 06046 User Manual of Product 1: AcuRite Iris (5-in-1) Indoor/Outdoor Wireless Weather Station for Indoor and Outdoor Temperature and Humidity, Wind Speed and Direction, and Rainfall with Digital Display (01512M) Instruction Manual. Weather Underground Sharing is limited to a single sensor per AcuRite Access® or Direct to Wi-Fi Display (Connection Device). This activates the Device ID with My AcuRite®, allowing you to add the Device ID to your My AcuRite® account. Though my display starts with the same device ID 24:C8:6E:XX:XX:XX that the app wants you to input, the only acceptable devices are Access hubs. My AcuRite’s environmental monitoring platform is an integral part of any smart home technology and smart home device arsenal. When removed, the device no longer appears on Possible Solutions If the Connection Device was just powered up, allow up to ten (10) minutes for the device to connect and register with My AcuRite. reading time 18 minutes. jqbak, klnnu, auux, xjw1i, m6iaa7, 1kw68, d9ec, f1vv6, buzx, s1m2d,